Oops ! Our English website is under development, we expect the development to be over by June , We highly regret the inconvenience caused.
Kindly bear with us and for enquiries please contact mail@kinlong.com .
Oops ! Our English website is under development, we expect the development to be over by June , We highly regret the inconvenience caused.
Kindly bear with us and for enquiries please contact mail@kinlong.com .
1. 一般用于支撑综合管廊中通信、强电等电缆管线以及风管、桥架等
2. 采用自动化下料工艺，确保上下主臂的尺寸一致
3. 托臂的主臂内带有连续的三角形齿牙结构，通过专用的钢槽锁扣来固定管线系统，使其整体具有良好的抗冲击，防滑动等性能
4. 主臂与底座的焊接工艺符合GB 50661的规定，焊缝具有较高的承载力且主臂的壁厚不小于2.5mm，焊缝质量稳定
5. 通过拧紧螺栓即可固定托臂，无需焊接
6. 托臂采用热浸镀锌工艺处理，锌层厚度及质量符合GB/T 13912的规定
